Ant

Hmm, I wonder why it is leaving so many files behind then. Example right now: Directory of C:\Users\ant\AppData\Local\Temp 05/13/2020 04:00 PM 71,280 SAS16B5.tmp 11/09/2020 08:35 AM 378,624 SAS16B6.tmp 05/13/2020 04:00 PM 149,848 SAS16C7.tmp 05/13/2020 04:00 PM 2,881,448 SAS16C8.tmp 05/13/2020 04:00 PM 4,371,320 SAS16C9.tmp 05/13/2020 04:00 PM 545,512 SAS16CA.tmp 09/14/2020 05:57 AM 452,528 SAS16CB.tmp 05/13/2020 04:00 PM 60,496 SAS16CC.tmp 09/02/2020 01:33 PM 842,448 SAS16CD.tmp 05/13/2020 04:00 PM 390,056 SAS16CE.tmp 11/12/2020 09:21 AM 11,823,672 SAS16CF.tmp 09/02/2020 01:33 PM 1,544,624 SAS16DF.tmp 05/13/2020 04:00 PM 912 SAS16E0.tmp 11/12/2020 09:21 AM 3,244,232 SAS16E1.tmp 05/13/2020 04:00 PM 83,184 SAS16E2.tmp 05/13/2020 04:00 PM 88,632 SAS16E3.tmp 05/13/2020 04:00 PM 88,248 SAS16E4.tmp 05/13/2020 04:00 PM 362,832 SAS16E5.tmp 05/13/2020 04:00 PM 521,272 SAS16E6.tmp 11/13/2020 08:13 AM 1,072,352 SAS16F7.tmp 05/13/2020 04:00 PM 31,528 SAS16F8.tmp 11/05/2020 07:37 AM 1,110,592 SAS16F9.tmp 05/13/2020 04:00 PM 1,782,312 SAS16FA.tmp 05/13/2020 04:00 PM 2,139,048 SAS16FB.tmp 09/02/2020 01:33 PM 181,336 SAS16FC.tmp 10/29/2020 07:17 AM 1,629,016 SAS16FD.tmp 11/13/2020 08:13 AM 3,517 SAS16FE.tmp 11/15/2020 12:24 PM 5,671 SAS16FF.tmp 05/13/2020 04:00 PM 178,248 SAS1700.tmp 08/04/2020 10:02 AM 512 SAS1701.tmp 11/15/2020 12:24 PM 76,587,008 SAS1702.tmp 10/28/2020 07:41 AM 292,096 SAS1712.tmp 05/13/2020 03:58 PM 132,072 SAS1713.tmp 01/23/2018 09:23 AM 149,744 SAS9FFA.tmp 01/23/2018 01:35 PM 13,312 SAS9FFB.tmp 06/01/2020 10:44 AM 149,742 SAS9FFC.tmp 07/21/2020 11:30 AM 149,742 SAS9FFD.tmp 08/26/2020 12:07 PM 118,272 SAS9FFE.tmp 05/13/2020 04:00 PM 71,280 SASCC8B.tmp 11/09/2020 08:35 AM 378,624 SASCC8C.tmp 05/13/2020 04:00 PM 149,848 SASCC8D.tmp 05/13/2020 04:00 PM 2,881,448 SASCC8E.tmp 05/13/2020 04:00 PM 4,371,320 SASCC8F.tmp 05/13/2020 04:00 PM 545,512 SASCC90.tmp 09/14/2020 05:57 AM 452,528 SASCC91.tmp 05/13/2020 04:00 PM 60,496 SASCCB1.tmp 09/02/2020 01:33 PM 842,448 SASCCB2.tmp 05/13/2020 04:00 PM 390,056 SASCCB3.tmp 11/12/2020 09:21 AM 11,823,672 SASCCB4.tmp 09/02/2020 01:33 PM 1,544,624 SASCCB5.tmp 05/13/2020 04:00 PM 912 SASCCB6.tmp 11/12/2020 09:21 AM 3,244,232 SASCCB7.tmp 05/13/2020 04:00 PM 83,184 SASCCB8.tmp 05/13/2020 04:00 PM 88,632 SASCCB9.tmp 05/13/2020 04:00 PM 88,248 SASCCBA.tmp 05/13/2020 04:00 PM 362,832 SASCCCB.tmp 05/13/2020 04:00 PM 521,272 SASCCCC.tmp 11/13/2020 08:13 AM 1,072,352 SASCCCD.tmp 05/13/2020 04:00 PM 31,528 SASCCCE.tmp 11/05/2020 07:37 AM 1,110,592 SASCCCF.tmp 05/13/2020 04:00 PM 1,782,312 SASCCD0.tmp 05/13/2020 04:00 PM 2,139,048 SASCCD1.tmp 09/02/2020 01:33 PM 181,336 SASCCD2.tmp 10/29/2020 07:17 AM 1,629,016 SASCCD3.tmp 11/13/2020 08:13 AM 3,517 SASCCD4.tmp 11/17/2020 07:52 AM 5,673 SASCCE4.tmp 05/13/2020 04:00 PM 178,248 SASCCE5.tmp 08/04/2020 10:02 AM 512 SASCCE6.tmp 11/17/2020 07:51 AM 76,917,760 SASCCE7.tmp 10/28/2020 07:41 AM 292,096 SASCCE8.tmp 05/13/2020 03:58 PM 132,072 SASCCE9.tmp 01/23/2018 09:23 AM 149,744 SASE65D.tmp 01/23/2018 01:35 PM 13,312 SASE65E.tmp 06/01/2020 10:44 AM 149,742 SASE65F.tmp 07/21/2020 11:30 AM 149,742 SASE660.tmp 08/26/2020 12:07 PM 118,272 SASE661.tmp 76 File(s) 227,585,330 bytes I delete my %temp% like once a week.

Thanks. Shouldn't SAS be automatically deleting these SAS*.TMP files if not needed anymore instead of users doing it?

https://www.dslreports.com/forum/r32942152- and I noticed this too. I'm using SAS in my decade old, updated 64-bit W7 HPE SP1 PC. I don't run SAS all the time too (only manual updates and scans). Thank you for reading and hopefully answering soon. :)

Hello. In my old updated 64-bit W7 HPE SP1 PC, SUPERAntiSpyware v8.0.1838 (free) says these downloaded files are infected with Trojan.Agent/Gen-Dropper: https://the.earth.li/~sgtatham/putty/latest/w64/putty.exe ftp://ftp.chiark.greenend.org.uk/users/sgtatham/putty-latest/w64/putty.exe https://the.earth.li/~sgtatham/putty/latest/w32/putty.exe ftp://ftp.chiark.greenend.org.uk/users/sgtatham/putty-latest/w32/putty.exe They were from https://www.chiark.greenend.org.uk/~sgtatham/putty/latest.html web page to download. Are these false positives? I hope so! Thank you for reading and hopefully answering soon.

Yeah, I did that las week. It was already checked and I pressed that button. I wonder if it will offer me the update for the recently released 5.0.1150 internal update. I will check again when I see the client later on.

I just got .1150 update through the internal updater. I read its changelog and it was more than install.

Hi! I was updating my client's very old Windows 2000 SP4 machine with SAS Free v5.0.1137. When I ran SAS Free, it did not tell me there is a newer build to download and install. What's up with that? Thank you in advance.

Thanks. When is v5.1 coming out then? [grin]

Same here. I know .1116 had a core service fix for W2K SP4. So what's in .1118 over .1116 then?

Thanks. I will wait for its small patch/update.

Didn't the company have previous licenses from years ago?As for the newer build, will there be an update or do W2Kers have to download the whole installer manually? Also, I don't see a newer build (still 1108).

Thanks, but why does https://www.superantispyware.com/superantispyware.html say "Windows 2000, XP, Media Center, Vista, Windows 2003 and Windows 7 ..." for its system requirements? I assume v5 still supported W2K. If it is not supported, then the installer should be blocked to install and run. Also, this web page needs to be updated.

FYI I was able to reproduce its service problem easily on a clean, updated W2K SP4 in an old VMware Workstation v4.5.3's image as shown attached.

Wait a minute. Are you telling me SAS QA didn't test it in updated W2K SP4?

Hello. I am trying to upgrade SAS Free to the latest v5 on my dad/father/pa's old Dell PC with Windows 2000 SP4 (all updates from MS). I downloaded SAS installer manually. It uninstalled old SAS v4.x and installed v5, but told me SASCORE.EXE - "Entry Point Not Found. The Procedure entry point WTSGetActiveConsoleSessionId could not be located in the dynamic link library KERNEL32.dll." I attached a screen shot of this error dialog box. I noticed there is no SAS service like in XP and 64-bit W7 UE. What's wrong? SAS free seems to run and I recall service is required. Older SAS versions never had this problem. If v5 won't work, then where I can redownload v4 and how long will its support be? Thank you in advance.

Thanks.

Here is a screen shot/capture showing two scenarios: http://i.imgur.com/ybPHw.gif ... I am using XP Pro.'s accessibility option for its high display contrast setup.

SAS v5.0 free installer and its installed program is difficult to read and use XP Pro.'s accesssiblity high contrast display.

Thanks, but I think it is already fixed when I checked a few days ago?

Hello! I downloaded and installed MultiPar v1.1.6.9 from http://hp.vector.co.jp/authors/VA021385/MultiPar116.7z in my old, updated 32-bit Windows XP Pro. SP3 machine... This morning, my updated SAS Free Edition v4.48.1000's manual scan thinks MultiParShlExt.dll v1.1.6.7 is infected with Trojan.Agent/CDesc[Generic]. http://virusscan.jotti.org/en/scanresult/ea3c7f3ac77eded45eacdf0de6822e395609f358 http://www.viruschief.com/report.html?report_id=0e7591d703ea3dec2419eaa867441fed561af261 http://www.virscan.org/report/e57855e1728c90e89768f4d5ce0d3b39.html http://www.virustotal.com/file-scan/report.html?id=ad925de098f79047ad7089e18dc1933c2e1c0d05e9682d087be61df909183d6e-1295201653 (only SAS' Trojan.Agent/CDesc[Generic]) Thank you in advance. P.S. I sent a false positive notice through the program as well, but it might be faster through here.

Hello. Once in a while I submit a positive false positive/FP to SuperAntispyware/SAS. Is there a way to track my submissions without waiting for updates and rescan? I just submitted one from extracted Wireshark v1.4.0 portable (http://media-2.cacetech.com/wireshark/win32/WiresharkPortable-1.4.0.paf.exe) through the latest SAS Free and it found a possible non-cookie infection: SUPERAntiSpyware Scan Log https://www.superantispyware.com Generated 09/15/2010 at 10:05 PM Application Version : 4.43.1000 Core Rules Database Version : 5515 Trace Rules Database Version: 3327 Scan type : Complete Scan Total Scan Time : 00:54:51 Memory items scanned : 509 Memory threats detected : 0 Registry items scanned : 14771 Registry threats detected : 0 File items scanned : 107556 File threats detected : 5 Adware.Tracking Cookie cdn2.themis-media.com [ C:\Users\foobar\AppData\Roaming\Macromedia\Flash Player\#SharedObjects\88VCHVG6 ] dlr1.wdpromedia.com [ C:\Users\foobar\AppData\Roaming\Macromedia\Flash Player\#SharedObjects\88VCHVG6 ] msnbcmedia.msn.com [ C:\Users\foobar\AppData\Roaming\Macromedia\Flash Player\#SharedObjects\88VCHVG6 ] objects.tremormedia.com [ C:\Users\foobar\AppData\Roaming\Macromedia\Flash Player\#SharedObjects\88VCHVG6 ] Trojan.Agent/Gen-OnlineGames D:\WORK\TOOLS\WIRESHARKPORTABLE140\APP\WIRESHARK\PLUGINS\1.4.0\COSEVENTCOMM.DLL I checked other sites and scanners and they said no problems: http://virusscan.jotti.org/en/scanresult/e0cfec6b0a78a454ff08c00219fb7fc6b8f5fcb7 http://www.viruschief.com/report.html?report_id=29152251c285f5ba793febbc36b30f67f8592b91 http://www.virscan.org/report/5d5e1925f22a5d9a16fe03d9f42d9f0b.html http://www.virustotal.com/file-scan/report.html?id=3866563cf27ebf7a4410400ea04ebbece62e67d445296fd439e2b50197fd5ecd-1284663580 (one by your program) Thank you in advance.

Hello. I noticed a long wait after doing a program update in SAS and relaunching SAS on my father/dad's very old Dell Optiplex GX260 system with 512 MB of RAM, WIndows 2000 SP4, and Intel Prescott Pentium 4/IV (HT CPU). It seems superantispyware.exe's CPU, memory (like 300 MB?) usage, and HDD goes up high for a few minutes (over five minutes?). Is this normal? I did not notice this on my newer machines. Thank you in advance.

Actually, does anyone else here use 64-bit Vista and W7 with the default UAC settings? If so, then do he/she have the same problem with program updates? I had no problems with definition updates.

I just noticed ssupdate64.exe was stuck and hogging 25% of my quad-core CPU. I killed it and retried, but still nothing. I tried running as administrator, and it worked! So to get the program updates, I have to run SAS as administrator?

I used the updater in SAS' main program to force the check. yes, I tried disabling my firewall, and no still updates. I also tried running SAS as 64-bit W7's administrator, but that did not help. Just wondering... Does ssupdate.exe use non-default ports like 8080? I know the ISP's firewall is pretty strict and only allows defaults (21, 80, and 443).